Improve small bump sensitivity and rear suspension performance with the Fox Bearing Mounting Hardware. Pressing into a standard 1/2″ by 1/2″ eyelet, the roller bearings reduce friction and wear, allowing your suspension to move freely. Only suits frames that use 8mm x 30mm shock hardware.
The Fox Bearing Mounting Hardware assembly is made up of two anodised black bearing housings that are pressed into the shock eyelet. Two roller bearings are pressed into the bearing housings with a silver Bearing Spacer trapped between the two bearings. Black bearing spacers go on the outside of the bearings to center the assembly and prevent contamination.
– Sold as a set (per eyelet)
– May not suit all brands of shock or frame, as this bearing hardware is larger than standard bushing hardware. Check clearance before installation.
– May also fit other brands of shock – check clearance first.
– Press-fit installation. Requires Fox tool 803-01-406 / FX80301406 for removal.
What size mounting hardware do I need?
8mm x 30mm hardware suits a 8mm diameter bolt, with an overall mount width of 30mm.
Check with your frame manufacturer for what size of mounting hardware your bike uses.
Each bike needs to use the exact size of mounting hardware for correct fitment.
Using the wrong size of mounting hardware will damage your bike.
Are you not sure if this will suit your bike? Contact us.
